Share your internet connection

Want to use the internet on a computer or tablet but don't have a connection? Share your phone's cellular data connection with multiple devices by turning your phone into a Wi‑Fi hotspot. Or, share your internet connection with a single device using USB tethering or Bluetooth tethering.

Your cellular plan must support data sharing. If you don’t know, contact your carrier.

Hotspot: Set up

  1. Check that:

  2. Go to Settings > Network & internet > Hotspot & tethering.
  3. Touch Wi-Fi hotspot and do any:

    • Make it easier to find and connect to your hotspot. Touch Hotspot name and change it.
    • Prevent others from seeing your phone's network name. Check Hide my device.
    • See your current password or change it. Touch Hotspot password.
    • Improve hotspot signal. For less interference, change the broadcast channel/band to 5GHz. For a stronger signal, change it to 2GHz. (This feature is not available in all countries.)
    • Help other devices find your hotspot. Be sure Extend compatibility is on .
    • Increase the hotspot connection speed. If you no longer need to assist others in finding your hotspot, turn Extend compatibility off.
    • Limit the number of devices that can connect, or restrict access to only devices you specify. Touch Manage devices.
    • Save battery life. Touch Timeout setting to configure when the hotspot should automatically turn off if no one is using it.

Hotspot: Connect devices

  1. Check that cellular data is on. If cellular data is off, your phone doesn't have an internet connection to share.
  2. Go to Settings > Network & internet > Hotspot & tethering.
  3. Touch Wi-Fi hotspot.
  4. Turn Use Wi‑Fi hotspot on , then plug in your phone to charge. Using the hotspot really drains the battery!

    When your hotspot is active, you'll see in the status bar.

  5. Set up the connection.

    To connectDo this
    A phone
    1. On your phone, next to the hotspot's name, touch and unlock if prompted.
    2. Use the other phone's camera to scan the QR code that provides the password.
    Other device
    1. Open the device’s Wi-Fi settings.
    2. Select your phone’s hotspot.
    3. Enter the hotspot password. Learn how to find the hotspot's password.

Hotspot: Manage connections

Number of connections

To see the number of devices connected to your hotspot:

  • In quick settings, look below .
  • Or, go to Settings > Network & internet > Hotspot & tethering and look under Wi-Fi hotspot.

By assigning a password for your hotspot, you ensure that people can't connect to your hotspot without your knowledge or permission.

Control who can connect

To disconnect all devices and prevent them from reconnecting:

  1. Turn the hotspot off.
  2. Change the password.
  3. Turn the hotspot back on to continue using it.

If you’re experiencing performance issues, you can limit the number of connections allowed or temporarily disconnect devices.

  1. Go to Settings > Network & internet > Hotspot & tethering.
  2. Touch Wi-Fi hotspot > Manage devices.
  3. Do any of the following:

    • To limit number of devices allowed, touch Device limit.
    • To temporarily disconnect devices until your next hotspot session, under Connected devices, touch the device's name > Disconnect. The device will remain unable to connect until you turn off and restart the hotspot.

To allow only specified devices to connect:

  1. Get the MAC addresses of the devices you want to allow to connect. (Connect devices to the hotspot normally, then go to Manage devices, and touch the name of each connected device to view its MAC address.)
  2. Touch Manage allowed devices > Add allowed device.
  3. For each device, enter the MAC address and device name.
  4. Once you add allowed devices, they are saved unless you delete them, and you can turn this feature on and off by checking or unchecking Allow all devices any time.

To restrict access for a previously allowed device, touch the device name, then touch Delete.

Hotspot: View or change password

  1. Go to Settings > Network & internet > Hotspot & tethering.
  2. Touch Wi-Fi hotspot.
  3. Touch Hotspot password to see the current password.
  4. To change the password, type over the current password.
NoteAlthough you can turn off passwords for your hotspot, keeping a password prevents unauthorized usage of your cellular data.

Hotspot: Manage security

If you're getting a warning about weak security for your hotspot, set a strong hotspot password. Also, secure your hotspot by selecting a protocol:

  1. Go to Settings > Network & internet > Hotspot & tethering > Wi-Fi hotspot.
  2. Touch Security.
  3. Adjust settings:

    • WP3 is the most secure choice.
    • Choose WPA2/WPA3 for newer devices (made after July 2020). Older devices may not be able to connect to a WPA3 or WPA2/WPA3 mixed network.
    • Choose WPA2 (AES) for the widest compatibility with both current and older devices.
    • Don’t use None for this setting.

USB tethering

To connect a device to the internet using your phone's cellular data and a USB cable:

  1. Check that cellular data is on. If cellular data is off, your phone doesn't have an internet connection to share.
  2. Connect your phone to your computer with a USB cable.

  3. On your phone, go to Settings.
  4. Touch Network & internet > Hotspot & tethering.
  5. Turn on USB tethering to start the connection.

    You'll see in your notifications.

To stop the connection, touch the notification and turn off USB tethering, then disconnect your phone and computer.

Bluetooth tethering

To connect a device to the internet using your phone's cellular data and a Bluetooth connection:

  1. Check that cellular data is on. If cellular data is off, your phone doesn't have an internet connection to share.
  2. Turn on Bluetooth on your phone and pair with the other device.
  3. Set up the other device to get its network connection via Bluetooth.
  4. On your phone, go to Settings.
  5. Touch Network & internet > Hotspot & tethering.
  6. Turn on Bluetooth tethering to start the connection.

To stop the connection, turn off Bluetooth or touch & hold in quick settings and disconnect the device.

Fix an issue

If you're having issues, try these troubleshooting steps: